|
1.
|
It warp threads
is appeared in the entire length, it's whole surface defects.
|
| |
|
|
2.
|
If there's found defects over 1/10 of fabric
length with scattered, repeat and continuous,
|
|
|
it's whole defects.
|
|
|
|
|
3.
|
If the defects is
appeared within 1.5cm partly, it's not applied in defects. But
hole and |
|
|
tear are except.
|
|
|
|
|
4.
|
Hole and tear are
applied following demerit point in each items. |
|
|
(I) Cotton, synthetic
spinning cloth : Under 3㎝, 10 point |
|
|
(II) synthetic cloth
: 5㎝ DLGK 10 point |
|
|
(III) corduroy :
Under 1.5㎝, 4 point |
|
|
|
|
5.
|
Defects' length
is long side makes defects' direction to measure warp threads
and the |
|
|
woof.(But, warp
and woof threads are the same, or shorter's defects' demerit
point is |
|
|
large, it applies
demerit point is large part's defects.) |
|
|
|
|
6.
|
If there're over 2 kinds of defects are duplicated,
it applies the largest demerit point's
|
|
|
defects. |
| |
|
|
7.
|
If warp threads'
defects length is over 36" (4 point system's item is 20㎝ ),
it applies the |
|
|
same kinds' defects
which is relatived in the length. |
|
|
|
|
8.
|
If there're over
2kinds defects within the length 36" (4 point system's item
is 20㎝ ), if |
|
|
the demerit point's
amount is over 10 point (4 point system's item is 4 point),
the excess |
|
|
point is not included
in the demerit point. |
|
|
|
|
9.
|
Finding is serious
and hard to modifying defects is medium defects, and possible
to |
|
|
modify, like stained,
or slight to find, so when it made the final product, it can
decide the |
|
|
good or no good
according to the defects are found point. |
|
|
|
|
10.
|
Partly defects are
found in normal(4 point system's item is found in slight) is
slight |
|
|
defects. It applies
demerit mark. And over the normal degree(4 point system's item
is |
|
|
found in normal)
is medium defects, it applies demerit mark. |
|
|
|
|
11.
|
Demerit mark of
slight defects's calculating except cut in a cross and lengthwise
|
| |
multiplies slight
defects' demerit mark amount by 1/4. It's demerit mark. |
| |
|
spinning